BIGTREETECH ADXL345 S2DW Accelerometer USB Board 3D Printer Parts For Voron StealthBurner Raspberry Pi M8P Motherboard Klipper

Plug-and-Play

Effortlessly connect ADXL345/S2DW to your Klippered printer with a simple setup, taking advantage of high-performance MCU hardware SPI for data sampling and communication, and enjoy compatibility with various host systems, easily connect to Raspberry Pi or Manta boards + CB1 with USB ports using a standard USB-A to USB-C cable.

Flexible Mounting Options

Method 1: StealthBurner Direct Mount

Method 2: Nozzle Mount

S2DW V1.0 Remarkable Accuracy and Stability

The S2DW V1.0 features the LIS2DW12TR, offering the same acceleration measurement capabilities as the adxl345. With higher sensitivity, lower noise, and improved temperature stability, the LIS2DW12TR achieves excellent precision and consistency.

S2DW V1.0

P/N：LIS2DW12TR

Package：2.0×2.0x0.7mm

Sensitivity @2g FS：Up to 16bit 0.244mg/LSB

Supply Current：90uA in HP mode

Supply Voltage：Vdd:1.62-3.6V，Vddio:1.62-3.7V

Dynamic Range：±2, ±4, ±8, ±16

zero-g offset：±20mg

zero-g change vs. temperature：±0.2mg/°C

Noise FS±2g)：1.3mg

Output Rate：1.6Hz-1600Hz

Resoultion：0.244 mg/digit

S2DW V1.0/ADXL345 V2.0 Specifications

Dimensions：33.25×15.5mm

Microprocessor：RP2040 Dual ARM Cortex-M0+@133MHz

Input Voltage：DC 5V

Logic Voltage：DC 3.3V

Communication with PC：USB2.0

Sensor Communication：4Line SPI

Sensor Operating Temperature Range：-40°C to +85°C

ADXL345 V2.0

Package：3.0×5.0x1.0mm

Sensitivity @2g FS：10bit 3.9mg/LSB

Supply Current：140uA in HP mode

Supply Voltage：Vdd:2.0-3.6V，Vddio:1.7-3.6V

Dynamic Range：±2, ±4, ±8, ±16

zero-g offset：±40mg

zero-g change vs. temperature：±0.4mg/℃

Noise FS±2g)：2.9mg

Output Rate：0.1-3200Hz

Resoultion：Up to 3.9mg/LSB

Compatible

• VzBoT

• Voron

• Blv

• Raspberry Pi

• FLY-Gemini

Refer to this link for Klipper configuration

//www.klipper3d.org/Measuring_Resonances.html.

The wiring in the link is directly connected to the Raspberry Pi. If you want to connect to the MCU motherboard, you can refer to the following wiring and configuration:

[adxl345]

cs_pin: PD9

spi_bus: spi1

#spi_software_sclk_pin: PA5

#spi_software_mosi_pin: PA7

#spi_software_miso_pin: PA6

1. The ADXL345BCCZ three-axis accelerometer needs to have a stable installation plane, otherwise it will affect its measurement accuracy.

2. Note that the board is powered by 5V, and 5V and GND cannot be reversely connected.

ADXL345：

//github.com/bigtreetech/ADXL345

S2DW：

//github.com/bigtreetech/LIS2DW