JAYO 3D Printer PLA//PETG/PLA PLUS/ASA/ Easy ABS Filament 1.75mm 10 Rolls 3D Printing Materials Non-toxic for 3D Printer&3D Pen

1.PLA Filament Features & Parameter:

PLA Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-210℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

PLA Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and strong rigidity;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork and industrial design samples
Grade

2.PLA PLUS Filament Features & Parameter:

Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 205-215℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

PLA PLUS Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;
6. 10 times higher toughness than PLA on the market
Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork, industrial design samples
And product models with higher toughness requirements.

3.PETG Filament Features & Parameter:

PETG Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 230-240℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=320M,
3.0MM(1KG)=105M

PETG Filament Features:

1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent
The toughness, weather resistance, and good adhesion.
5. Good dimensional stability, no cracks
And warping.
6. High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable
Co-print all kinds of commonly used models, crafts, industry
Pieces, advertising words, etc.

4.PLA matte Filament Features & Parameter:

PLA matte Product Parameter:

Wire diameter: 1.75mm
Tolerance: ± 0.02MM
Printing temperature: 205-215 ℃
Bottom plate temperature: Apply glue when not heated
Heating 50-60 ℃ without applying glue
Printing speed: 50-100MM/s
Bubble: 100% zero bubble
Net weight: 1.1KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM (1KG)=330M

PLA Matte Filament Features

1. 【PLA Features & Matte Color】- JAYO’s newly upgraded Matte PLA Filament colors retain the original JAYO PLA advantages: Easy Printing, No Clogging, while adding more color options. Matte PLA can print prints with non-glossy colors and frosted textures, suitable for more premium and mysterious 3D models.

2. 【SUNLU 100% Wound Neatly 3D Filament】- JAYO R&D team has mastered advanced technology and produced 100% Neatly Wound 3D Printer Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.

3.【Recommend Settings & Easy to operate】- We recommend printing the PLA Matte Filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s. JAYO PLA MATTE Filament Dimensional Accuracy +/- 0.03mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, easy handling, resulting in an outstanding surface finish and are highly precise.

1.PLA Meta Filament Features & Parameter:

PLA Meta Filament Features :

【High Speed Printing PLA META Filament】JAYO 1.75mm PLA Meta 3D printer filament(Tolerance Level : ± 0.02mm)smooth squeeze. PLA Meta filament is 1.5 times more fluid than regular PLA. Minimum tolerance

【PLA META Filament Recommend Settings】 JAYO PLA Meta filament is very tough and not easily brittle, the model does not break easily when dropped from a height to the ground. PLA Meta filament Print nozzle temperature 185-195℃, Hot bed temp: 50°C-65°C, Print speed: 50-100mm/s, low printing temperature printing for greater energy efficiency.

【Glossy Surface & Good Adhesion】Brightly coloured PLA Meta 3d printer filaments bring glossy surface prints to arts, crafts and 3D projects. JAYO PLA Meta filament 1.75mm has the advantages of high purity with good adhesion and superb layer bonding.

【Neatly Wound Filament 】JAYO has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure neat lines with few kinks, avoiding possible breaks.

PLA Meta Product Parameter:

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 185-195℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles
Net weight: 1.1KG/roll,0.25KG/roll

6.ASA Filament Features & Parameter:

Product Parameter:

(1) Wire diameter: 1.75/3.0MM

(2) Tolerance: ± 0.02MM

(3) Printing temperature: 255-275 ℃

(4) Bottom plate temperature: 80-100 ℃

(5) Printing speed: 40-60MM/s

(6) Bubbles: 100% zero bubble

(7) Net weight: 0.65 KG/roll

ASA Filament Features:

1. Good weather resistance,

2. UV resistance is more than 10 times stronger than ABS.

Suitable for all models of FDM3D printers, suitable for printing outdoor weather and UV resistant products

7.Easy ABS Filament Features & Parameter:

Product Parameter:

1. Wire diameter: 1.75/3.0MM

2. Tolerance: ± 0.03MM

3. Printing temperature: 225-235 ℃

4. Bottom plate temperature: 60-70 ℃

5. Printing speed: 40-60MM/s

6. Bubbles: 100% zero bubble

7. Net weight: 1 KG/roll

Easy ABS Filament Features:

1. When printing, there is no need for an insulation box, and an open printer can be used

2. The shrinkage rate is low, and the printed model does not warp or crack. Note: Printing models with a bottom surface of more than 10 square centimeters can increase the bottom
plate temperature to 80-90 degrees.

3. Extremely low odor during printing

4. Consumables do not need to be dried and are less affected by humidity

5. Balanced physical properties, high strength, and good toughness

Shipping

* You can check parcel tracking information through this ways:

1.//www.17track.net

2.//track.4px.com

3. Leave a message to us, then we will check the parcel information for you.

After Sale

*We offer a one-year warranty for electronic products , but damage caused by using non original brand filament or not following the instructions correctly is not covered by the warranty.

*Please provide us with the proof of video if products have any problem after receiving the parcel within 7 days, we will offer replacement or refund after confirming the problem.

Contact Us

*If satisfied with our product, please kindly leave us a positive feedback and 5 stars.

*If any questions, you may contact our customer service in 24 hours before negative feedback. We’ll try our best to help you.

We look forward to cooperating with you next time!