SUNLU Easy ABS 3D Printer Filament 1kg 1.75mm Spool Acrylonitrile Butadiene Styrene Consumables For 3d Printer Model Printing

What is SUNLU Easy ABS?

We adjusted the ratio between the three (Acrylonitrile, Butadiene, Styrene) and added a little SUNLU wisdom into the mix.
While the hardness and acid and alkali resistance remain the same, SUNLU have slightly reduced its heat resistance.
The result is a minimum printing temperature of 225°C and a minimum heating of 70°C for the base plate.
But E-ABS still maintains the low stress it should have: no cracking, no warping!

Description:
1. Printing does not need a holding tank, open printer can be used!
2. Low shrinkage, print models do not warp or crack!
(Note: Printing the bottom 10 square centimeters above the model can raise the temperature of the base plate to 80 ~ 90 degrees.)
3. Very low odor when printing
4. Filament do not need to dry, very little impact by humidity
5. balanced physical properties, high strength, good toughness

Parameter:
Material: SUNLU E-ABS(Easy-ABS)
Wire diameter: 1.75MM
Tolerance: ± 0.02MM
Printing temperature: 225-235 ℃
Base plate temperature: 60-70℃
Melt index: 98g/10`min
220℃/10kg(g/10min)
Elongation at break：20%
Melting point ℃: 130
Heat distortion temperature ℃: 57.9
Density g/cm³: 1.04
Printing speed: 40-60mm/s
Bubble: 100% zero bubble
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll

As AliExpress sell globally, it’s unable using one method to ship orders to all countries. We choose the best shipping method for you while considering shipping cost and efficiency. Most countries enjoy FREE SHIPMENT while some countries still cost.

We provide 12 MONTHS warranty for all our products. If you find defected part, please take a photo immediately and send it to our after-sale customer .We have professional after-sale team to solve your problems online.